進口潛水深井泵(進口品牌)
進口潛水深井泵-BACH巴赫
產品概述：
1.泵機組由：水泵、潛水電機（包括電纜）、輸水管和控制開關四大部分組成。潛水泵為單吸多級立式離心泵：潛水電機為密閉充水濕式、立式三相鼠籠異歩電動機，電機與水泵通過爪式或中.鍵筒式聯軸器直接；配備有不同規格的三芯電纜：起動設備為不同容量等級的空氣開關和自耦減壓起動器、輸水管為不同直徑的鋼管制成，采用法蘭聯接，高揚程電泵釆用閘閥控制。
2.潛水泵每級導流殼中裝有一個橡膠軸承；葉輪用錐形套固定在泵軸上：導流殼采用嫘紋或螺栓聯成一體。
3.高揚程潛水泵上部裝有止回閥，避免停機水錘造成機組破壞。
4.潛水電機軸上部裝有迷宮式防砂器和兩個反向裝配的骨架油封，防止流砂進入電機。
5.潛水電機采用水潤滑軸承，下部裝有橡膠調壓膜、調壓彈簧，組成調壓室，調節由于溫度引起的壓力變化；電機繞組采用聚乙烯絕緣，尼龍護套耐水電磁線，電纜聯接方式按QJ型電纜接頭工藝， 把接頭絕緣脫去刮凈漆層，分別接好，焊接牢固，用生橡膠繞-層。再用防水粘膠帶纏2~3層，外面包上2 3層防水膠布或用水膠粘結包一層橡膠帶（自行車里胎>以防滲水。
6.電機密閉，采用精密止口螺牷，電纜出口加膠塾進行密封。
7.電機上端有一個注水孔，有一個放氣孔，卜部打個放水孔。
8.電機下部裝有上卜—止推軸承，止推軸承上有溝槽用干冷卻，和它對磨的是不銹鋼推力盤，水泵的上廠軸向力
產品特點：
混流式多級離心泵結構，采用鑄造AISI 316部件制造；
泵軸和聯軸器使用AISI 329雙相不銹鋼材料；
葉輪由統一的固定鍵固定在泵軸上，并配備軸保護軸套；
高效設計和高等級材質保證了水泵的耐用長壽、高可靠性和簡單方便的維護；
所有型號都配備內置單向閥，可有效防止水錘危害；
高效水力設計，運行成本低；
零流量（閉閥）運行大允許時間為2分鐘。
結構說明：
深井潛水電泵整個機組由泵工作部分、潛水電機、管路部分（包括揚水管、泵座等），電纜、閘閥、控制柜等組成。泵與電機通過聯軸器直接相連潛入水中工作。
1. 泵工作部分是機組的核心。由葉輪、中殼、上殼、泵軸、軸承、進水節、逆止閥和閥體等零件組成。
2. 潛水電機是機組的動力源。由定子、轉子、上、下導軸承、止推軸承、底座、連接架、密封裝置等零件組成。
巴赫簡介
巴赫，您可靠的合作伙伴
歡迎您來到巴赫。我們集研發、生產、配套定制及專業服務為一體，為您提供完整、優質的配套，工藝及控制系統的解決方案。
巴赫產品的價值主張是：可靠、便利、新穎。
客戶的便利是巴赫追求的重要目標。提供的便利，包括：
-- 產品覆蓋范圍寬廣，產品線齊全完備，可供選擇的產品類型豐富，為客戶提供“一站式"解決方案，節約時間和精力。
-- 為客戶提供特殊需求定制，專門產品定制，相關產品集成等系列服務，滿足客戶個性化需求或有效解決具體的施工難題。
-- 選型軟件完善，提供技術細節完整詳細，配件豐富，非常貼合施工和使用實際，節省大量的溝通澄清時間。
-- 提供敏捷的供貨期，充分滿足那些直到后一刻才得以決定下來的客戶。
3.并非簡單追求“與眾不同"，而是追求“為客戶創造價值的創新"
-- 結構更簡單、合理；
-- 安裝使用更方便；
-- 維修的負擔少，綜合擁有成本（TOC）低；
-- 更為敏捷務實的方法快速解決售后服務問題。
Bach, your reliable partner
The value proposition of Bach's products is reliable, convenient and novel.
Bach's long-term adherence to R&D capability innovation, manufacturing strength building, quality system building, and customer service improvement, focusing on improving the reliability of products and services, are all reliable and necessary conditions.
-
Reliability comes first of all from strong strength. In the stage of product research and development, it is checked repeatedly and verified carefully to improve reliability.
Secondly, we must rely on the powerful agile manufacturing capability, which is based on equipment hardware and integrated by lean management.
Third, the construction of quality assurance system and the implementation of products.
Finally, self-management alone is not enough. A large number of third-party certification of the arduous process, so that Bach products have experienced painful transformation repeatedly, and gradually become mature and reliable.
2. Convenience: Convenience is the second value proposition of Bach's products
-
Customer convenience is an important goal of Bach. The facilities provided include:
-
The products cover a wide range, complete product line and abundant product types are available, providing customers with "one-stop" solutions, saving time and energy.
- Providing customers with special needs customization, special product customization, related product integration and other series of services to meet customer personalized needs or effectively solve specific construction problems.
- Perfect selection software, complete and detailed technical details, rich accessories, very suitable for construction and practical use, saving a lot of communication and clarification time.
Provide an agile delivery date to fully satisfy customers who have not been able to decide until the last minute.
3. It is not a simple pursuit of "distinctiveness", but the pursuit of "innovation to create value for customers".
-
- Simpler and more reasonable structure;
- Easier installation and use;
- Low maintenance burden and low TOC;
- A more agile and pragmatic way to quickly solve the problem of after-sales service.
（僅供參考）
