QQ交談
MSN交談
產品展示
MBC10P31ANAHEIM驅動控制器MBC10P31
- 公司名稱：
- 更新時間：
- 所 在 地：
- 生產地址：
- 瀏覽次數：
- 昆山恩歐凱自動化設備有限公司
- 2017-07-18 13:32:41
- 蘇州市
- 728
【簡單介紹】
【詳細說明】
ANAHEIM驅動控制器MBC10P31
Features
? Output Current of 10.0A Peak
? 2000 Steps/Revolution
? On-Board Programmable Pulse Generator with 2 motion profiles
? Pulses From 1Hz to 50kHz
? Directional Soft and Hard Limit Switch Inputs
? Pulse Generator Clock Output
? Busy Output
? Motor On/Off Input and Automatic Current Reduction
? Short Circuit Protection
? Output Current of 10.0A Peak
? 2000 Steps/Revolution
? On-Board Programmable Pulse Generator with 2 motion profiles
? Pulses From 1Hz to 50kHz
? Directional Soft and Hard Limit Switch Inputs
? Pulse Generator Clock Output
? Busy Output
? Motor On/Off Input and Automatic Current Reduction
? Short Circuit Protection
Introduction
The MBC10P31 is an low cost single axis step motor driver integrated with a programmable pulse generator.
The MBC10P31 microstep driver/pulse generator has an output current capability of 1.5A minimum to
10.0A maximum （peak rating）. The MBC10P31 driver operates with a DC voltage of 20VDC to 80VDC. The
MBC10P31?s internal controller can store two different programmable motion profiles. The MBC10P31
also has directional soft and hard limit switch inputs, a busy output and a clock output that can be used for
daisy chaining drivers together. The MBC10P31 driver features direction control and motor current On/Off
capabilities. The ?Reduce Current Enabled? feature automatically reduces motor current to 50% of the set
value. The driver has built in features to indicate power on （green LED）, running （yellow LED） and error
conditions （red LED）. The MBC10P31 has a fixed step resolution of 2000 steps/revolution for a 1.8° stepper
motor. The bipolar drive configuration handles 4, 6, and 8 lead step motors and is also equipped with over
current protection. The MBC10P31 communicates via USB communication. The easy to use Windows
software, SMPG-SMSI Software, is used to directly set up the two different motion profiles.
The MBC10P31 is an low cost single axis step motor driver integrated with a programmable pulse generator.
The MBC10P31 microstep driver/pulse generator has an output current capability of 1.5A minimum to
10.0A maximum （peak rating）. The MBC10P31 driver operates with a DC voltage of 20VDC to 80VDC. The
MBC10P31?s internal controller can store two different programmable motion profiles. The MBC10P31
also has directional soft and hard limit switch inputs, a busy output and a clock output that can be used for
daisy chaining drivers together. The MBC10P31 driver features direction control and motor current On/Off
capabilities. The ?Reduce Current Enabled? feature automatically reduces motor current to 50% of the set
value. The driver has built in features to indicate power on （green LED）, running （yellow LED） and error
conditions （red LED）. The MBC10P31 has a fixed step resolution of 2000 steps/revolution for a 1.8° stepper
motor. The bipolar drive configuration handles 4, 6, and 8 lead step motors and is also equipped with over
current protection. The MBC10P31 communicates via USB communication. The easy to use Windows
software, SMPG-SMSI Software, is used to directly set up the two different motion profiles.
